Solar EV Charging in Australia: How It Works at Home

Yes, you can use rooftop solar to charge an electric vehicle at home, and you do not need a home battery to do it. If your car is parked at home while your panels are generating electricity, some of that generation can go towards charging. How much you use depends on what else is running in the house, how much power the car is drawing and whether your charger can respond to changes in solar output.


1. How does solar EV charging work at home?

Rooftop panels generate direct current (DC). In a typical grid-connected home, the solar inverter converts it into alternating current (AC) that household appliances and a wall-mounted AC EV charger can use. The car's onboard charger then converts AC into DC for its battery. The wall charger draws from the home's AC supply.

Diagram showing how rooftop solar powers an EV through an inverter and home AC supply, with grid and optional battery connections.
Simplified energy flow for a grid-connected home with an optional AC-coupled battery.

2. How can you use excess solar power to charge your EV?

When you have spare solar generation

If your panels produce 4 kW and the rest of the house is using 1 kW, about 3 kW is available for other uses at that moment. A compatible charger can use some or all of that surplus if the car and charger can operate at the required current. The figure is an example of instantaneous power. Over an hour at a steady 3 kW, that would be about 3 kWh of electricity before charging losses.

When solar output drops

A cloud, the oven or another large load can reduce the surplus. Depending on the charger and its settings, the system may draw the difference from the grid, reduce charging current or pause. A vehicle and charger need a minimum current to sustain a session, so a small surplus may be insufficient to keep charging. If you need the car ready by a set time, a schedule that allows grid power may suit you better than waiting for surplus generation.

When you charge after dark

After sunset, the grid can supply your charger. A compatible home battery may also contribute, subject to its available charge, discharge limit and control settings. If your electricity plan offers off-peak rates, compare those hours with the times your vehicle is usually parked at home.

Important to Know

Not all EV chargers automatically track excess solar energy. Solar-aware charging typically requires compatible monitoring equipment and system settings. Charging behaviour may vary depending on available solar power and the charger configuration.

3. Do you need a home battery?

A home battery is optional. If the car often sits at home during sunny hours, you may be able to use rooftop generation as it is produced. Start with your parking routine: how often is the car at home around the middle of the day, and how much energy do you typically need to replace before the next trip?

If the car is usually away during the day, a home battery can shift some solar energy into the evening. Its value depends on how much spare generation you have, how much energy the battery can deliver, your import tariff, the feed-in credit you would give up and the cost of the battery. Compare those factors with overnight grid charging before sizing a battery around the EV.

4. Choosing a solar EV charger for your home

Start with the vehicle's AC charging limit, the home's available electrical capacity and the time you normally have to charge. T-Power's AQ7 is rated at 7 kW on single-phase supply, and the AQ22 at 22 kW on suitable three-phase supply. Both use Type 2 AC charging. The actual rate depends on the vehicle, installation and settings. See our 7 kW vs 22 kW compatibility guide for the full comparison.

T-Power lists Eco, Eco+ and Fast modes, wireless current transformer (CT) integration and dynamic load balancing for the AQ7/AQ22 range. Ask which monitoring equipment your installation needs and how the selected mode behaves when solar output falls. If limiting grid imports is a priority, confirm the configuration before installation. A licensed electrician can assess your switchboard, circuit capacity and monitoring requirements.

5. Can I add a solar-aware EV charger to my existing solar system?

It may be possible to keep your existing panels and inverter. Ask your installer how the charger will measure household imports and exports, whether it needs a separate CT and how it will interact with any existing battery or energy management system. Before requesting a quote, gather your inverter model, vehicle model, and details of any home battery or energy management system. Ask a licensed electrician to check switchboard capacity, metering compatibility and whether a CT is required.

Make the Most of Your Home Solar Energy

Explore T-Power's smart EV charging solutions or speak with our team about your home's charging requirements.

Explore AQ7/AQ22 Contact T-Power

References & Further Reading